Omnitronic CDP-2400 Manual Del Usuario página 29

29. BANK/CUE-BUTTONS
You can memorize a Cue-point and a sample on every Bank/Cue-button. The memorized Cue-button or the
sample (press Sampler-button first) can be recalled via the respective Bank/Cue-button.
30. SCRATCH-WHEEL
Playback-mode:
Via the Scratch-wheel, you can adjust the playback-speed by +/- 100 %. Please refer to the explanations
under 6.6 Adjusting the playback-speed.
Pause-mode:
In the pause-mode, the current frame is repeated as soon as you turn the Scratch-wheel.
Via the Scratch-wheel, you can slowly search within a title forwards and backwards. In this way, you can
easily find a Cue-point for example.Turn the Scratch-wheel to the right in order to search forwards and turn it
to the right in order to search backwards. The faster you turn the Scratch -wheel the higher the searching-
speed. Please refer to the explanations under 6.7 Cueing.
Vinyl Cue-function:
If you press the Scratch-button, you can activate the VINYL CUE-function. This function disables the frame-
function of the CD-player and you can search for the Cue-point as with a turntable. Please refer to the
explanations under 6.8 Interactive scratch-wheel.
Cue Scratch-function:
Press and hold the Scratch-button until the LED is lit. The aluminium surface of the scratch-wheel is now
activated. When touching the scratch-wheel, the player returns to the cue-point.
31. BPM-BUTTON
Via the BPM-button, you can switch the display from beats per minute (BPM) to speed-adjustment in %.
Press and hold the BPM-button in order to switch form manual to automatic beatcounter.
32. TAP-BUTTON
Via the Tap-button, you can display the beats per minute of a track. Press the button in the rhythm of the
music. The display shows the current beats per minute (BPM).
33. 4/8/16/100%-BUTTON
With this button, you can select the speed-adjusting range between +/- 4 % (LED red), +/- 8 % (LED flashes
red) +/- 16 % (LED blue) or +/- 100 % (LED flashes blue). Please refer to 6.6 Adjusting the playback-speed.
34. PITCH BEND-BUTTONS
With the Pitch Bend-buttons, you can adjust the playback-speed temporarily by up to +/- 100 %. Please refer
to 6.6 Adjusting the playback-speed.
If you press and hold the Pitch Bend - button, the playback speed decreases down to 0. This effect is
comparable with the Motor Off-effect.
Rear panel:
35 36 35 36
29/71 10602365X17NXS_V_1_0.DOC