Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Does not read the program
Pop noise
Faderstart does not work
8. CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
9. TECHNICAL SPECIFICATIONS
Power supply:
115/230 V AC, 50/60 Hz
Power consumption:
25 W
Type:
Dual Compact Disc Player
Available disc:
Standard CDs 8 and 12 cm
Quantisation:
D/A-converter: 1 Bit
Sampler frequency:
44.1 kHz
Frame-accuracy:
1/75 sec
Pitch adjustment:
+/- 4 %, +/- 8 %, +/- 16 %, +/- 100 %
Display:
Remaining track time and track playback time
Distortion:
0.01 %, 1 KHz
S/N-ratio:
80 dB
Channel seperation:
75 dB
Frequency range:
20 - 20,000 Hz; +/- 0 dB
Audio output:
unbalanced via RCA
Output level:
1 Vrms, +/- 1 dB
Digital ouput:
unbalanced via RCA, 44.1 kHz stable
Dimensions:
482 x 88.8 x 262 mm (CD-player)
482 x 177 x 65 mm (control unit)
19"-dimensions
Weight:
5.5 kg (CD-player)
3 kg (control unit)
Please note: Every information is subject to change without prior notice. 20.11.2003 ©
connections
The player is in normal playback
mode
Mixer or amplifier connections
inapropriate
Missing Audio Out-connection
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
Press the Play/Pause-button and
re-program
Check cable and jack quality
Connect the Audio Out-sockets
with the Line-input sockets of your
mixer
37/71
10602365X17NXS_V_1_0.DOC
Publicidad
Tabla de contenido
