Basic Installation And Connections; Connecting The Camera - Sony IPELA SNT-V704 Manual De Instalación

Basic Installation and Connections

B
Connecting the
Camera
Controllable cameras
The SNT-V704 enables control of the
following video cameras:
xCameras manufactured by Sony
BRC-300
EVI-D100
EVI-D70
SSC-DC590/DC690
xCameras manufactured by others
Refer to the User's Guide.
Each camera needs each setting. For details,
see "Setting the Camera" of the
User's Guide in the supplied CD-ROM.
Connecting BRC-300/300P, EVI-
D100/D100P and EVI-D70/D70P
Up to four cameras can be connected to
SNT-V704 at the same time.
1
t
Connect the connector 1 to 4 of
SNT-V704 and the video output
connector of each camera.
Note
When connecting cameras, connect
from the t connector 1 to 4 in order. If
these are connected at random, this unit
may not work properly.
2
Connect VISCA RS-232C connectors
of SNT-V704 and each camera.
Refer also to the Instruction manuals of
the camera for connection of the
camera.
SNT-V704 (rear)
1 12
1
RS-232C
I/O
13 24
SEE INSTRUCTION MANUAL CLASS 2 WIRING DC 12V
75-ohm
coaxial cable
(not supplied)
BRC-300
series (rear)
BRC-300 series
(rear)
BRC-300 series
(rear)
BRC-300 series (rear)

Connecting the Camera

2 3 4
VISCA cable
(not supplied)
VISCA cable
(not supplied)
VISCA cable
(not supplied)
11
GB