Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Confirming the HDMI control
functions
To use the HDMI control functions properly,
it is recommended to confirm the HDMI
control functions usable with each connected
component by performing the following
operations.
1
Turn on all the components connected
with HDMI cables.
2
Turn the TV off to standby mode.
• Confirm that all the components are
turned off.
3
With all the components off, start
playback of a device (connected with
HDMI cable).
4
Confirm that all the components are
turned on and the inputs of the main unit
and TV are switched automatically.

About HDmI

HDMI (High Definition Multimedia Interface)
supports both video and audio on a single
digital connection for use with DVD players,
DTV, set-top boxes, and other AV devices.
HDMI was developed to provide the
technologies of High Bandwidth Digital Content
Protection (HDCP) as well as Digital Visual
Interface (DVI) in one specification. HDCP is
used to protect the digital content transmitted
and received by DVI-compliant displays.
HDMI has the capability to support standard,
enhanced, or high-definition video plus
standard to multi-channel surround-sound
audio. HDMI features include uncompressed
digital video, a bandwidth of up to 2.2 gigabytes
per second (with HDTV signals), one connector
(instead of several cables and connectors), and
communication between the AV source and AV
devices such as DTVs.
This main unit is also compatible with the
DeepColor and x.v.Color feature (x.v.Color is
trademarks of Sony Corporation.).
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing, LLC.
Note
• Check the setup of the connected
component if an image is poor or the
sound does not come out of a component
connected via the HDMI cable.
• Audio signals (sampling frequency,
bit length, etc.) transmitted from an
HDMI jack may be suppressed by the
connected component.
• When the connected component is not
compatible with copyright protection
technology (HDCP), the image and the
sound from the HDMI TV OUT jack may
be distorted or may be not output. In
this case, check the specification of the
connected component.
• Regardless of which input is selected
for the system, the video signal from the
HDMI input jack (BD, DVD, SAT) that was
last selected is output from the HDMI TV
OUT jack.
Connections
13

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

S7

Tabla de contenido