Chapter Ii Display; General Description - Thermo Scientific Orion Star Manual Del Usario

Chapter II

General Description

Throughout a given process, the display on the Orion Star and Star Plus series
meters provides temperature and calibration data . The temperature appears in the
left, top corner of the display . The
calibration setup menu is active . The man, 2, 4, 7, 9, 10, and 12 icons indicate
which pH buffers were saved after a pH calibration is performed . The setup icon
only appears when the meter is in setup mode . The
condition and when it is displayed with the
quality issue exists . The
mode is active and is discussed in greater detail in the Meter Setup section .
Temperature
Calibration
5 Star Meter
This is the display of the 5-Star meter capable of multi-parameter measurements .
The single and dual parameter meters will have fewer measurement lines,
depending on the meter capabilities .
Note: In the measurement mode, the three main lines of data on the meter display
correspond to what is being measured.
Thermo Scientific Orion Star
Display
icon indicates that the AUTO-READ measurement
and Star Plus Meter User Guide
™
icon indicates that a calibration mode or
icon, a calibration alarm or electrode
icon indicates an error
pH/ISE/ORP
Unit
Conductivity
Unit
DO Unit
EN-3