RIDGID R4112 Manual Del Operador página 18

ASSEMBLY
 Using the blade wrench, loosen the socket head screws
that secure the fence to the miter table. See figure 15.
 Rotate the fence left or right until the saw blade is parallel
with the square.
 Retighten the screws securely. Check blade squareness
to fence and readjust if necessary.
 Replace the sliding miter fences.
Your saw has several scale indicators. After squaring adjust-
ments have been made, it may be necessary to loosen the
indicator screws and reset them to zero. See Figures 19 - 20.
BLADE
SLIDING
MITER
FENCE
VIEW OF BLADE NOT SQUARE WITH FENCE,
ADJUSTMENTS ARE REQUIRED
SQUARE
MITER
TABLE
Fig. 18
INDICATOR
SCREW
MITER
SCALE
SCALE
INDICATOR
BEVEL
SCALE
18
SCALE
INDICATOR
SCALE
INDICATOR
INDICATOR
SCREW
Fig. 19
Fig. 20