Wear Parts; Correct Disposal Of This Product; Guarantee Conditions - Pontec PondoClear Island-3000 Instrucciones De Uso

Replacing the UVC lamp
The UV-C emitter may only be replaced by a qualified electrician, preferably by a qualified electrician from the manu-
facturer's company. The UV-C emitter type may only be provided by the manufacturer of the original unit. Only use UV-
C lamps, the designation and capacity data of which correspond to the information on the unit type plate.
The unit must always be disconnected from the power supply before the UV-C emitter is replaced.
Attention! Breakable glass.
Possible consequences: Injury to your hands caused by cuts.
Protective measures: Handle the quartz glass and UVC lamp with care.
The UV-C lamp has to be replaced after approx. 8000 operating hours. Only use UV-C lamps the designation and rat-
ing of which match the information on the type plate.
To replace the UVC lamp open the UVC water housing. (→ Cleaning the UVC water housing and quartz glass)
How to proceed:
 F
1. Remove the quartz glass by carefully turning and pulling it off the UVC lamp.
2. Pull the UVC lamp out of the lamp socket and replace it with a new one.
3. Observe the following: The anti UV silica gel must be inserted into the quartz glass first. Never remove the silica gel.
If there is no silica gel inside the quartz glass, the UV rays may cause damage, see Fig. F.
4. Reassemble the unit in the reverse order.
5. The LED lamps are only for decoration. For replacing the LED lamp it must be replaced and provided by the manu-
facturer, its service agent or similarly qualified persons in order to avoid a hazard.

Wear parts

The following components are wear parts and are excluded from the warranty:
• Impeller unit and foam filter
• UVC lamp, quartz glass and O ring for quartz glass
Storage/Over-wintering
Remove the unit at temperatures below zero degrees centigrade. Thoroughly clean the unit, check for damage and
store immersed in water in a frost-free environment. Do not immerse the plug!

Correct Disposal of this product

This marking indicates that this product should not be disposed with other household wastes throughout the
EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return your used device, please use
the return and collection systems or contact the retailer where the product was purchased. They can take this
product for environmental safe recycling.

Guarantee conditions

PfG grants a 2 year guarantee from the date of sale on proven material and manufacturing faults. Prerequisite for our
guarantee is the presentation of the purchase receipt. Our guarantee will become null and void if the unit is misused,
electrically or mechanically damaged by inappropriate use and improper repair by non-authorised workshops. Repairs
are reserved for workshops authorised by PfG or by PfG itself. In the case of warranty claims, please return the defec-
tive unit or part freight paid to PfG together with a description of the fault and the purchase receipt. PfG reserves the
right to invoice repair costs. PfG is not liable for transport damage. Any damage must be claimed against the carrier.
Further claims of whatever type, especially consequential damage, are excluded. This guarantee does not affect the
final customer's claims against the dealer.
- EN -
15