Changing The Type Of Massage; Changing The Direction Of The Massage Jet; Cleaning And Care; Disinfecting The Whirltub System - DURAVIT Jet Project Manual De Instrucciones

> Press the "Jet" button.
The jets are switched on / off.

Changing the type of massage

> Open the air regulator.
Air is added to the water massage.

Changing the direction of the massage jet

> Rotate the ball of the jet nozzle until you find the most pleasing direction for the
massage jet.

6. Cleaning and Care

NOTICE
The surfaces may be damaged by using the wrong cleaning agents.
Never use abrasive, aggressive or chemical cleaners.

6.1 Disinfecting the whirltub system

How often?

Disinfect the whirltub system before using it for the first time, and then after every
tenth bath, but at least once a month and after a long period of no use.

How?

CAUTION
Chlorine bleach irritates the skin.
> Observe the safety instructions on the disinfectant label.
> Do NOT bathe in the whirltub while disinfecting it.
> Ensure that the room is well-ventilated during the disinfection process.
> Fill the tub with water.
> Add 2% chlorine bleach to the water in accordance with the manufacturer's instruc-
tions (approx. 15 ml).
> Switch on the jet nozzles for 5 minutes so that all pipes are flushed.
> Allow the water in the tub to settle for 5 minutes.
> Switch on the jet nozzles again for 5 minutes.
19