Product Description; Fast Forward And Rewind - Beper EL.202 Manual De Instrucciones

Recordable Radio Use instructions

PRODUCT DESCRIPTION

1.VOLUME control
2.3V DC power jack
3.Earphone jack
4. Function selector
5. FM antenna
6. STOP button
7. F.FWD (Fast forward) button
8. REW (Rewind) button
OPERATION RECORDING
1. Open the cassette compartment.
2. Install a cassette with desired side facing outward (visible through window).
3. Close the cassette compartment.
4. Press the RECORD button. The PLAY button will automatically engage. The Record indicator will
alight.
5. Place the recorder close to the sound source.
6. Press the STOP button to stop recording.
NOTE
1. The first few sounds that activate the unit may not be recorded .For best results, say a few intro-
ductory words before you begin dictation.
2. Variation in voice level will not temporarily stop the unit (two-to-six seconds of silence is required).
3. Built-in record level control automatically sets the recording input level.
PAUSE CONTROL
Slide the PAUSE switch up to suspend function in PLAY, RECORD, FAST FORWARD or REWIND
mode. Slide the switch down to resume operation.

FAST FORWARD AND REWIND

To rapidly advance or rewind the tape, press the F.FWD or REW button. To stop the tape at the
desired position or once the tape has ended press STOP button again.
SET-UP
Install 3 UM1 batteries (not included) into the battery compartment, matching the polarity as indica-
ted inside the chamber.
9. PLAY button
10. RECORD button
11.Battery compartment ( on back panel )
12. Speaker
13. Radio frequency
14. Cassette compartment
15. TUNING frequency selector
16. Built-in microphone
12