Technical Data - Beper EL.202 Manual De Instrucciones

Recordable Radio Use instructions
VOLUME/VAS SENS CONTROL
When the unit is in playback mode, this control adjusts the playback volume level.
When the unit is in record mode, this control adjust the microphone sensitivity. At maxi-
mum, a soft sound can turn on the recorder. At minimum, a louder sound is required.
TAPE PLAYBACK
To listen to your recorded cassette, rewind to the starting point and press STOP. Press play and
adjust the VOLUME control to the desired listening level.
NOTE: A tape must be played back at the same speed used to record it.
TAPE ERASE:
To erase a tape, simply record over the unwanted recording.
EARPHONE JACK:
When you plug your earphones (not included) into the EARPONE jack, the built-in speaker is auto-
matically disconnected.
CHANGING BATTERIES:
Slide open the battery compartment on the back of the unit. Insert 3 UM1 batteries, following the
polarities indicated inside the chamber, replace the battery compartment door.
NOTE: REMOVE THE BATTERIES IF THE UNIT WILL NOT BE USED FOR MORE THAN 30
DAYS. USE ALKALINE BATTERIES FOR LONGER LIFE.

TECHNICAL DATA

Power supply: 4.5V DC adapter or 3 batteries LR20 D TORCH
Frequency Range: FM 87.5-108 MHz
AM 530-1600 KHz
For any improvement reasons, Beper reserves the right to modify or improve the product
without any notice.
13