Free Arm; Leveling The Machine Base Plate; Thread Cutter; Spool Pins - Singer C240 Manual De Instrucciones

Free Arm

To use the free arm, slide off the removable storage
compartment. When attached, a hook keeps the
removable storage compartment securely attached to the
machine. Take off the removable storage compartment
by sliding it to the left.

Leveling the Machine Base Plate

To make sure your machine stands steadily on your
sewing surface you can adjust the base plate height.
clockwise to lower and counter-clockwise to raise the
base plate.

Thread Cutter

To use the thread cutter, pull the thread from back to

Spool Pins

Your machine has two spool pins, a main spool pin and
an auxiliary spool pin. The spool pins are designed for
many types of thread. The main spool pin is used in a
horizontal position can be used for most sewing and
embroidery threads. The auxiliary spool pin is used in a
vertical position.
Main Spool Pin
Place a spool cap and the thread spool on the spool pin.
Make sure that the thread reels over the top and slide on
the second spool cap.
Use a spool cap slightly larger than the thread spool.
For narrow thread spools, use a smaller spool cap in
front of the spool. For large thread spools, use a larger
spool cap in front of the spool.
against the spool. There should be no space between the
spool cap and the thread spool.
10
Large spool cap
Small spool cap
A
B