General Information; Technical Data; General Safety Regulations - Nussbaum TIX Manual De Instrucciones

IMPORTANT!
This hand-book completes the tyre changer manual whose instructions are still valid.
This hand-book contains only the additional instructions for the correct use of the TIX bead seating device.
The TIX device has been created to assist the operator during bead seating on tubeless tyres.
The use of this device is limited to that specified in this manual.
Any other use is improper and therefore not authorized.
Before beginning any kind of work on or with this machine, carefully read and understand the contents of these operating instructions.
The manufacturer shall not liable for any injury to persons or damage to things caused by improper use of this machine.
KEEP THIS MANUAL NEAR THE MACHINE AND CONSULT IT AS NEEDED DURING OPERATIONS.
Working air pressure
Device weight
Acoustic pressure level (at work)
Operators who work with this machine must be qualified and authorized.
To be considered qualified, an operator must understand the written instructions given by the manufacturer, be trained and be familiar
with the regulations governing labour safety.
Operators must not make use of drugs or alcohol which could alter their faculties.
It is, however, essential to:
- Know how to read and understand the descriptions.
- Know the performances and characteristics of this machine.
- Keep unauthorized persons away from the operating zone.
- Make sure that the installation has been made in compliance with all the pertinent regulations and standards in force.
- Make sure that all the operators have been sufficiently trained, that they know how to use the equipment in a correct and safe way
and that there is adequate supervision.
- Never touch the electrical equipment or power lines unless the power has been previously turned off.
- Carefully read this manual and learn how to correctly and safely use the machine.
- Always keep this manual ready to hand in an easily accessible place and consult it when necessary.
WARNING!
Unauthorized variations or modifications to the machine shall relieve the manufacturer from all liability for any
deriving damages or accidents.
In particular, removal or tampering with the safety devices represents a violation of the Labour Safety
regulations.

1. GENERAL INFORMATION

2 - TECHNICAL DATA

3 - GENERAL SAFETY REGULATIONS

12
ENGLISH • Instruction manual
8 - 10 bar (114 - 145 Psi)
14 kg
LpA < 70 dB (A)