Advanced Operation; Clock Mode - miniland baby Thermotalk plus Instrucciones De Uso

result of the reading, and you will hear the
result via the speaker if the TALK function is
enabled. When the "ooo" disappears from the
screen, the next reading can be taken.
2. To take the forehead temperature:
Put on the forehead probe onto the unit,
then locate the probe gently in the center of
the forehead, midway between the eyebrow
and the hairline. Press [ ] key once to start
the forehead measurement (the measuring
time is approximately 1~2 seconds). Upon
completion you will hear two short beep
sounds, the LCD will display the result of the
reading, and you will hear the result via the
speaker if the TALK function is enabled.
3. The result will automatically be recorded in the memory. Once 15
recordings have been stored, on taking the 16th recording, the first set of
data will be removed and the new recording will take the top position.
4. Three readings can be taken consecutively. However, you should wait for
at least 10 minutes before taking a new reading.
5. Display of the results:
A. An accurate value display for result ranges between 32.0°C and 42.9°C
(89.6°F and 109.3°F)
B. "Hl" is displayed for result above 42.9°C~109.3°F
C. "LO" is displayed for result below 32.0°C~89.6°F
6. Once the reading has finished, the unit will automatically return to time
mode after 30 seconds.
7. The display will automatically turn off after 3 minutes after the last key has
been pressed (if sleep mode is enabled).

5.3. ADVANCED OPERATION

5.3.1. Clock mode

1. Display time in a sequence of year, month, date, hour, minute with a
flickering " : " stands for seconds. The LCD displays the current time and
room temperature every 5 seconds.
2. Press [ ] to show the current time and/or room temperature (except for
French and Russian).
23