Prior To Using The Grinder; Scope Of Supply; For Your Safety; Symbols - Mahlkonig ProM Instrucciones De Servicio

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

GB
H O R E C A G R I N D E R

PRIOR TO USING THE GRINDER

After unpacking as well as prior to each use,
check if the grinder or the power cord show any
signs of damage. If there is damage, do not use
the grinder, but instead notify your dealer.
These Operating Instructions comply with valid
EU standards and regulations. Also observe
country-specifi c guidelines and laws outside
Germany!
Please read through the safety instruc-
tions and Operating Instructions care-
fully prior to initial use. This is the only
way to ensure that all features are used safely
and reliably. Store these Operating Instructions
in a safe place and also pass it on to any subse-
quent owner.
ATTENTION: MAHLKÖNIG test runs each grinder
with coffee to ensure an optimal grinding
performance. This is why you may fi nd ground
coffee residue in the grinding mechanism!

SCOPE OF SUPPLY

• Coffee grinder
• Hopper with lid
• Operating Instructions
The following parts are located in the hopper:
• Grounds bin
• Port-a-fi lter holder
• Residue tray
• Screw driver
• Cleaner brush
Check if the shipment is complete and undam-
aged. If a part is missing or defective, please
contact your dealer.
14

FOR YOUR SAFETY

SYMBOLS

SEVERE RISK!
DANGER
Failure to observe this warning can
lead to physical injury or death.
ATTENTION
MEDIUM LEVEL OF RISK!
Failure to observe this warning may
cause material damage.
SLIGHT RISK!
TAKE CARE
Instructions which should be ob-
served when using the grinder.

SAFETY WARNINGS

Hazardous voltage!
DANGER
Faulty electrical installation or
excessive line voltage may result in
an electric shock.
• Only use the grinder if the line voltage match-
es the specifi cations on the nameplate.
• Regularly check the grinder and cables for
damage. Do not operate the grinder if it is
damaged or the power cable or the plug are
damaged.
• If the power cable of this grinder is damaged,
it must be replaced by the manufacturer or its
customer service or a person having similar
qualifi cations in order to avoid risks.
• Connect the grinder only to a correctly
grounded power outlet. If you are unsure,
because it can be seen that the earthing con-
tacts or the power outlet have, for instance,
been painted over, in the interests of your
own safety have the power outlet checked by
a qualifi ed professional.
• Do not open the casing yourself; only allow
the repair to be done by authorized special-
ists. Contact an authorized customer service

Publicidad

Tabla de contenido
loading

Tabla de contenido