Removing The Port-A-Fi Lter Holder; Operation; Setting The Grinding Time; Setting The Fi Neness Of The Grind - Mahlkonig ProM Instrucciones De Servicio

GB
H O R E C A G R I N D E R
3. Insert the port-a-fi lter as a reference. If the
port-a-fi lter does not stay in the desired
position, the holder must be readjusted.
REMOVING THE PORT-A-FILTER HOLDER
• Press the holder gently together as shown
above than pull it forward from below.
18

OPERATION

SETTING THE GRINDING TIME

The grinding time depends not only on the
desired quantity of ground coffee, but also on
the fi neness of the grind. Work out the optimal
setting by means of repeated trials.
Set the desired grinding time with the button
(pos. 6).
SETTING THE FINENESS OF THE GRIND
DANGER Risk of damage resulting from
improper use!
• Adjust the fi neness of the grind only when
the grinder is in operation or when there are
no beans in the grinder.
Set the degree of fi neness using the button
(pos. 3).
fi ne = fi ne grind
medium = medium grind
coarse = coarse grind
3
4
5
6
7