Airo ORIA Serie Manual De Usuario página 54

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

( 1) Prepare a polyvinyl chloride pipe with a 32mm outer diameter.
(2) Fasten the tubing to drain hose with the adhesive agent and factory-supplied clamp.
The drain piping must be performed with a down-slope pitch of 1/25 to 1/100.
.
.
Hose Band
Jj
Dram P ip e
(Accessory)
Connect
on
=--"
.
15
.
Dram House
(Accessory)
* The total length of a+b+c
a�300, b�850, c�50, a+b+c�1100
* In case of lifting the drain pipe at outlet part, perform the drain piping work as shown in the above figure.
(3) lnsulate the drain pipe after connecting the drain hose.
Hose Band (Accessory)
Packing (5Tx270x270)
(Accessory)
Hose Band
(Accessory)
e
Drain House
(Accessory)
Vinyl Chloride
(Field Supplied)
lnstallation and Maintenance
X Upward Slope
Unit
Drain Pipe
Connection
This drain pipe shall be
separating from other pipes
53
/ Rising part X
e:
E

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Oria 18 intOria 24 intOria 36 int

Tabla de contenido