Schneider Rhodos Instrucciones De Montaje página 43

Now put the assembled cross base at the location where the umbrella is to
be set up. Make sure the ground underneath is solid and level.
Now insert 4 paving slabs in the cross base.
IMPORTANT:
Always use all four paving slabs with a size of 50x50x5 cm!
Never use the umbrella stand without paving slabs.
Now place the cover (L) on the rotating plate as shown.
The rectangular notch on the cover must be at an even distance from the
tube on all sides. Otherwise, the cover may be damaged by the pole in the
next step.
EN
43