Maintenance; Body Maintenance; Filter Maintenance; Air Quality Sensor Maintenance - brondell P300 Serie Manual Del Propietário

6 MAINTENANCE

WARNING: Always unplug the O2+ Source before cleaning or performing other
maintenance. Never immerse the appliance in water or any other liquid.
Do not use harsh chemicals or cleaning agents such as bleach or alcohol to clean any part of
the appliance.
Only the Pre-Filter can be cleaned and reused. The other filters are NOT reusable.

6.1 BODY MAINTENANCE

Regularly clean the inside and outside of the body of the O2+ Source to prevent dust from
collecting on the unit.
1. Wipe away dust with a soft dry cloth from the body of the appliance. Use a damp cloth or
mild cleanser to remove heavy dirt
2. Clean the Air Inlet and the Air Outlet with a soft brush or vacuum cleaner

6.2 FILTER MAINTENANCE

Make sure to change the filters when the Filter Replacement Indicator notifies you. In addition
to changing the filters as needed, you will also want to clean the Mesh Pre-Filter.
To clean the Mesh Pre-Filter, use a vacuum on the low speed to clear any buildup. Do not rinse
or soak the filter in water or any other liquid. The Mesh Pre-Filter is the only filter that can be
cleaned and reused, all other filters need to be replaced.

6.3 AIR QUALITY SENSOR MAINTENANCE

Use a damp swab or soft brush to clean the Air Quality Sensor every 2 months or as needed
to ensure the best performance of the O2+ Source. Follow the below steps to clean the Air
Quality Sensor:
1. Use a soft brush
to clean the vents
above and below
the Air Quality
Sensor.
11
2. Remove the
protective cover
of the Air Quality
Sensor.
3. Use a damp swab
to clean the Air
Quality Sensor
and vents. Use a
dry swab to dry
them if necessary.
4. Reattach the
protective cover
of the Air Quality
Sensor.