Mi-T-M Corporation GEN-6000-0MYE Manual Del Operador página 2

thanK yOU for purchasing a Mi-t-M product.
rEaD thiS ManUaL carefully to learn how to operate
and service your machine correctly. Failure to do so could
result in personal injury or equipment damage.
thiS ManUaL ShOULD BE COnSiDErED a permanent
part of your machine and should remain with the machine
when you sell it.
MEaSUrEMEntS in this manual are given in both metric
and customary U.S. unit equivalents. Use only correct
replacement parts and fasteners. Metric and inch fasten-
ers may require a specific metric or inch wrench.
right hanD anD LEFt hanD sides are determined by
facing the motor end of the machine.
Warning: This product contains lead, a
chemical known to the State of California
to cause birth defects or other reproductive
harm.
Wash your hands after handling this product.
2
Introduction
The SERIAL NUMBER is located in the Specification
or Identification Numbers section. Accurately record all
the numbers to help in tracing the machine should it be
stolen. your dealer also needs these numbers when you
order parts. File the identification numbers in a secure
place off the machine.
Warranty is provided from your dealer for customers
who operate and maintain their equipment as described
in this manual. the warranty is explained on the warranty
certificate shown in this manual.
this warranty provides you the assurance that your dealer
will back products where defects appear within the war-
ranty period. Should the equipment be abused, or modi-
fied to change its performance beyond the original factory
specifications, the warranty will become void.
Operator's Manual