Steren MIX-308 Manual De Instrucciones página 16

1. MIC
XLR inputs for low impedance balanced microphones.
2. LINE
6.3 mm (¼ ") inputs for musical instruments or other devices.
3. GAIN
Controls the gain level of the microphones or equipment connected in each channel.
The internal scale (-16 to -60 dB) corresponds to the microphones; (+10 to -34 dB)
corresponds to musical instruments or other devices.
4. HIGH
Adjusts the sounds between -15 and +15 dB, with a center frequency of 12 kHz.
5. MID
Adjusts the signal of all musical instruments and the human voice between -15 and
+15 dB, with a central frequency of 2.5 kHz.
6. LOW
Adjust the signal of the male human voice and guitars or drums between -15 and +15
dB, with a central frequency of 80 Hz.
7. AUX SEND
Send the signal to the AUX bus; lhe signal is pre-cleared so that the auxiliary sending
is independent of the general fading. It is ideal for feedback or monitor.
8. AUX EFFECT
Adjusts the echo effect level for the channel.
9. PAN
Distribute the signal level between the left and right channels to make a stereo
sound effect.
3