Alcad CHI-043 Manual De Uso página 12

Press the "OK" button one time, the letter "E" will be shown in the upper right hand
part of the LCD screen. Press the right arrow button one time, changing the message
from AP to CLIENT. Press the "OK" button in order to delete the "E" shown in the
upper right hand part of the LCD screen. Press the button "MENÚ" again to apply the
changes. The CHI-043 will reboot t changes are applied.
With this change the CHI-043 will be only able to communicate with the other devices
through WiFi. The WiFi communication will be established automatically with the
connection parameters that were introduced previously in the AP mode. In case any
wrong data was entered, the CHI-043 can be configured to AP mode to configure
the device again.
TRANSPARENT
BRIDGE
ALCAD - 12