Operation Of Wireless Remote Control; Swing Button - Premium PAC9039G Manual De Usuario

Operation of wireless remote control

Note: Be sure that there are no obstructions between receiver and remote controller;
Don't drop or throw the remote control; Don't let any liquid in the remote control and
put the remote control directly under the sunlight or any place where is very hot.
Signal transmitter
Remote control
ON/OFF
ON/OFF button
Press this button, the unit will be turned on,
●
press it once more, the unit will be turned
off. When turning on or turning off the unit,
the Timer, Sleep function will be canceled,
but the presetting time is still remained.
MODE
MODE button
●
Press this button, Auto, Cool,Dry, Fan,
Heat mode can be selected circularly.
Auto mode is default while power on.
Under Auto mode,the temperature will not
be displayed; Under Heat mode, the
initial value is 28℃
modes, the initial value is 25℃
AUTO
AUTO
COOL
DRY
FAN
HEAT
Names and functions of wireless remote control
ｏ
82
（ Ｆ）
;Under other
77
（
COOL DRY
HEAT FAN
(Only for cooling and heating unit.)
SLEEP
FAN
●
SWING
●
ｏ
Ｆ） ．
６
SLEEP button
●
Press this button, Sleep On and Sleep
Off can be selected. After powered on,Sleep
Off is defaulted. After the unit is turned
off, the Sleep function is canceled. After
Sleep function set up, the signal of Sleep
will display. In this mode, the time of timer
can be adjusted. Under Fan and Auto
modes, this function is not available.
FAN button
By pressing this key,you may select AUTO,
FAN 1, FAN 2, FAN 3 or FAN 4, and may also
cycle between them. FAN 4 only in cool
or heat mode.After being energized,AUTO
isdefaulted.Only LOW fan can be set under
DRY mode, pressing this key can not adjust
the fan speed, but can send message.
Fan 1
Fan 3

SWING button

Press this key to activate or deactivate
the swing.
Fan 2
Fan 4