Specifications - Greenlee CMF-110 Manual De Instrucciones

Typical Measurements and Accuracy (cont.)
3) CMF-110/118 Resistance Measurement (Ω)
Range
6.000kΩ
60.00kΩ
600.0kΩ
6.000MΩ
60.00MΩ
4) CMF-110/118 Frequency Measurement (Hz)
Range
20Hz-30kHz

Specifications

LCD: Display maximum is 3000
Overload Indication: "OL" or "-OL" will be displayed
Low Battery Indication:
Sampling Rate: 3 times per second
Sensor Type: Rogowski Coil
Impact strength: The meter can be dropped from 2 meter's height
Clamp size: The CMF-110 has a coil size of 25.4cm (10 inches). The CMF-118 has a coil
size of 45.7cm (18 inches)
Electromagnetic field effect: When electromagnetic interference exists, the meter may
show an incorrect reading
Power Supply: 3 AAA 1.5V batteries
Auto power off: 10 minutes
Environmental Limitations
Operating Environment: Indoor use
Maximum height: 2000m
Safety: IEC61010-1, IEC61010-031, IEC61010-2-032, IEC61010-2-033, CAT IV 600V
Pollution level: 2
Working temperature and humidity: 0° C- 30° C (≤ 80%RH), 30° C - 40° C (≤ 75%RH),
Storage temperature and humidity: -20%° C - 60° C (≤ 80%RH)
12
Resolution
0.001kΩ
0.01kΩ
0.1kΩ
0.001MΩ
0.01MΩ
Resolution
0.1Hz
40° C- 50° C (≤ 45%RH)
Accuracy
±(1.2%+3Ω)
±(1.2%+30Ω)
±(1.2%+300Ω)
±(1.2%+3kΩ)
±(1.2%+30kΩ)
Accuracy
±1%+0.2Hz
Overload Protection
600 VAC
Overload Protection
600 VAC