Changing The Bulb - Thermador T36IT70CNS/01 Manual De Uso Y Cuidado

Changing the bulb
To avoid electrical shock which
can cause severe personal injury
or death, disconnect power to
appliance before making repairs.
After making repairs, reconnect
power.
C)
Switch off the appliance with
the POWER button! Pull out
the mains plug or switch off
the fuse,
Never touch a halogen bulb with
bare fingers.
When inserting a glass halogen
bulb, always hold with a soft
cloth.
We recommend that a service
technician changes the bulb.
Halogen bulbs above
Halogen bulb type:
20 W/12 V/socket G4
_3 Release the cover and remove
from the clip.
[3 Putt out the defective halogen
bulb.
[3 Insert a new halogen bulb.
Touch the halogen bulb with a
soft cloth only.
_3 Attach the cover and connect to
the clip.
Halogen bulbs at the
side
Halogen bulb type:
10 W/12 V/socket G4
C) Putt out the cover rail forwards.
[3 Remove the disc forwards.
_3 Pull out the defective halogen
bulb.
_3
Insert a new halogen bulb.
Touch the halogen bulb with a
soft cloth only.
C) Insert the disc.
_3 Insert the cover rail.
26