General Safety Instructions - Dexter J1G-ZP1A-210D Instrucciones De Montaje Y Utilización

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39

2. GENERAL SAFETY INSTRUCTIONS

WARNING! Read all safety warnings instructions, illustrations and
specifications provided with this power tool.
listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
b) Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust.
dust or fumes.
c) Keep children and bystanders away while operating a power tool.
cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not
use any adapter plugs with earthed (grounded) power tools.
matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and refrigerators.
earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges or moving parts.
entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor
Use of a cord suitable for outdoor use reduces the risk of electric shock.
use.
e) If operating a power tool in a damp location is unavoidable, use a residual current
device (RCD) protected supply.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the influence of drugs,
alcohol or medication.
A moment of inattention while operating power tools may
Cluttered and dark areas invite accidents.
Power tools create sparks which may ignite the
There is an increased risk of electric shock if your body is
Use of an RCD reduces the risk of electric shock.
148
Failure to follow all instructions
Distractions can
Unmodified plugs and
Water entering a power tool
Damaged or
PL
RU
KZ
UA
RO
EN

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido