Panacom CYCLONE XL Manual Del Usuario página 7

OPERATING
Normal function
1. Be sure to switch off the power and to connect the outputs to corresponding input jacks.
2. Turn on the power and wait 3-4 seconds untill the speaker functions are connected.
3. Select an audio source by pressing the INPUT key on the front panel or on the remote
control to display AUX,LlNE lN,USB A, WIRELESS,TUNER,RECU.
4. Adjust the VOLUME knob on the front panel or the VOL+/- key on the remote control to
adjust the setting of the main volume.
5. Press the MENU key on the front panel or on the remote control to display TREBLE, BASS,
XDRlVE, LlGHT MODE, MlC VOLUME/ECHO/BASS/TREBLE then adjust the VOLUME knob
or adjust +/- to change music treble, bass, light mode and MIC effect.
6. Press the DJ EFFECT key on the panel or the DJ kedy on the remote control to display
SCRATCH,REVERB,DEAT BOX,YEAH mode,then adjust the DJ knob to design and change
the music effect with you like.
7. Press the MUTE key to mute, press it again to reset.
Tuner applications
1. Before using the radio functions, you must attach the supplied antenna. Adjust the
antenna to obtain optimum reception. Press the INPUT key on the front panel(amplifier)or on
the remote control,to select " FM " function.
2. Press the CH+/CH- key on the remote control to find radio bands that you have previously
saved.
3. Press or hold the TU+/TU- key on the remote control to adjust the radio frequency
manually.
4. Press the AUTO key on the remote control, the machine will scan radio channels from
low-frequency to high-frequency by itself and memorize the channels one by one.
5. Press the MEMO key on the remote control and it will memorize the current radio frequency
on the band. Press the number buttons to set desired programed number. The machine can
memorize at most 40 FM radio bands.
6. In FM mode, press the ST.MO key on the remote control to select STEREO or MONO.
KARAOKE function
1. The machine can auto detect whether MlC1,MlC2 is inserted.
Please turn off the microphone volume and adjust the volume gradually after inserting the
microphone.
2. Press MENU on the front panel to display MVOL,then adjust the VOLUME knob to change
the microphone VOLUME.
3. Press MENU on the front panel to display ECHO,then adjust the VOLUME knob to change
themicrophone ECHO.
Note: Do not touch the top of the microphone when singing in oder to avoid howling effect.
Adjust the microphone volume gradually to avoid howling effect.
Wireless pair and connect
• Turn offany Wireless devices previously paired (linked) with this unit.
• Turn on the Wireless features on your phone or music player.
• Turn on and set this unit to Wireless mode. The flashing blue light WIRELESS on LED
display indicates it is in pairing mode.
• Set your phone or music player to search for Wireless devices.
• Select SP-5250 from search results on your phone or music player.
• Select OK or YES to pair this unit with your phone or music player.
• If protected, enter 0000 for passkey steady blue light indicates successful
connection.
• Press the DISCONNECT key on the remote to disconnect the Wireless.
Pg. 8