Operation
Figure G
Figura G
25005/97231 Rev D
7. Figure G shows the thermostat adjusting lug. The factory setting for normal operation
is approximately 11 o'clock. To raise the temperature, turn the lug clockwise. To
lower the temperature, turn the lug counter clockwise. To turn the thermostat off,
turn the lug all the way to the left.
8. Refill the water bottle with fresh water.
9. Reassemble the brush, brush tank, water regulator, and water bottle.
10. Plug in the power cord and turn the power switch on.
11 O'clock Position
Position 11 heures
Posición de 11 horas
Brush Tank Post
Montant du bac à brosse
Poste del tanque de la escobilla
Thermostat Adjusting Lug
Ecrou de réglage du thermostat
Orejeta de ajuste del termostato
19