Safety; Intended Use - Schluter Systems LIPROTEC LT EK 24V30W, LIPROTEC LT EK 24V50W Manual De Uso

Manufacturer's address
Schlüter-Systems KG
Schmölestraße 7
58640 Iserlohn, Germany
Phone: +49-2371-971-0
Fax: +49-2371-971-111
info@schlueter.de
2

Safety

2.1 Intended use

The components of the LIPROTEC system are used only to
create decorative or accentuating lighting effects indoors,
privately or commercially.
The system may be used in bathrooms or wet rooms only
under consideration of the types of protection of the
components and scope of protection according to DIN VDE
0100-701.
The component must not be used for the following
applications under any circumstances:
Outdoors

Underwater

In potentially explosive atmospheres

In swimming pools, saunas or steam baths

Exceeding the load limit required for the power pack is
possible through an incorrect combination of the system
components. This can be the case if LED strips are expanded
Directions for use for the power pack
EN
Safety
37