Operating Instructions
Minisafe Protec, PetControl NV100
2
1
230 V
~ connection!
This energizer shall not be used as an animal
trainer (inside a barn).
Description of function
Put the equipment into service by connecting the plug to a mains outlet. If the warning light (1)
flashes in sync with the pulses, the equipment is working correctly..
If the warning light (1) does not flash after connection to mains,
please check for correct mains voltage and proper connection. If no problem can be found, have
the equipment checked by an expert.
Important Notes:
For outside installation the device must also be protected against exposure to rain and direct
sunlight.
The equipment gives no warning if the electric fence is faulty.
This equipment carries a 2-year warranty in accordance with our Warranty Terms &
Conditions! Please see the attached Operating Instructions for safety tips, earthing,
commissioning, warranty terms and conditions and potential sources of fault!
3
4
3
Warning light (flashing =
1
equipment switched on)
2 Fence connection
3 Earth connection
4 Mains cable 230V ~
-EN-
Version : 2016.2