Wilo Stratos Serie Instrucciones De Instalación Y Funcionamiento página 32

English
LC display
Options menu: Selection of operating mode Heating (HV) /
Refrigeration Air-conditioning (AC) and conversion from US to SI units
LC display
28
Setting
Configuration of the IF-Modules
This setting is for configuring the IF Modules
(i.e. baud rate, bit format)
A, C,E and F are free parameters
The layout of the menu and of individual parame-
ters depends on the respective IF Module.
See the installation and operating instructions for
the IF Modules.
The display returns to the basic setting
Setting
Subject to technical alterations!
Turn the control button to adjust values.
The setting is applied
In the basic settings (menu level 1), press
the operating button for > 6 s.
After approx. 1 s, the menu level 2
appears (position setting of the display
screen).
.
WILO SE 03/2016