Shark S-DRAK Manual Del Usuario página 13

A
C
REMOVAL
- Move the visor to the lower position
- Pull the visor delicately downward
(Fig. A);
- Pull the visor forward, one side at a
time, to unclip it from the mounting
points in the helmet (Fig. B).
REPLACEMENT
We recommend
gloves to keep the visor clean during
installation. Carry out the above opera-
tion in reverse order;
wearing cotton
B
D
- Push, at one side at a time, the visor
forward to clip it onto the mounting points
in the helmet (Fig. A);
- And then clip the visor.
WARNING: If your visor no longer provides
you with clear visibility, you must immedia-
tely replace it. Never ride if your visor is
scratched, dirty, foggy or with your vision
obscured in any way.
perfect visibility.
VISOR SCREEN
Always ride with
13