Spare Parts; Disposal - Wilo Stratos GIGA Serie Instrucciones De Instalación Y Funcionamiento

6.0.0.0
E000
Fig. 61: Acknowledge error type E or F
12

Spare parts

13

Disposal

Installation and operating instructions Wilo-Stratos GIGA
If type E or F errors occur, proceed as follows to acknowledge (Fig 61):
• To change to menu mode, press the red button.
Menu number <6.0.0.0> flashes on the display.
12.3
• Press the red button again.
The error is acknowledged, and the status page is displayed.
NOTE:
The error will be acknowledged automatically if the cause of the error
is eliminated.
Spare parts may be ordered via a local specialist retailer and/or WILO-
customer service.
To avoid queries and incorrect orders, all data on the name plate
should be submitted for each order (pump name plate Fig. 9 Item 1).
CAUTION! Danger of property damage!
Trouble-free pump operation can only be guaranteed when orig-
inal spare parts are used.
• Only use original Wilo spare parts.
• Information to be provided when ordering spare part:
- Spare part number
- Name/description of the spare part
- All data of the pump name plate
NOTE:
List of genuine spare parts: see Wilo spare parts documentation
(www.wilo.com). The item numbers of the exploded drawings (Fig. 7)
are only for orientation and listing of the main components (table 1).
Do not use these item numbers when ordering spare parts.
Proper disposal and recycling of this product prevents damage to the
environment and risks to personal health.
Proper disposal requires the drainage and cleaning and the disman-
tling of the pump unit.
Lubricants must be collected. The pump components are to be sepa-
rated according to material (metal, plastic, electronics).
1. Use public or private disposal organizations when disposing of all
or part of the product.
2. For more information on proper disposal, please contact your
municipal government or waste disposal office or the supplier
from whom you obtained the product.
Subject to change without prior notice!
English
65