NSK Multi Pad Manual Del Usuario página 4

The use of ACCESSORIES, transducers and cables, with the exception of transducers and cables sold by
the manufacturer of this product as replacement parts for internal components, may result in increased
EMISSIONS or decreased IMMUNITY of this product.
This product should not be used adjacent to or stacked with other equipment. If adjacent or stacked use is
necessary, this product should be observed to verify normal operation in the configuration in which it will be
used.
If any water drops remain on the handpiece or handpiece cord after autoclaving, wipe them off. Staining may
result if left.
Users are responsible for applying this product to a patient.
Multi Pad needs special precautions regarding EMC and needs to be installed and put into service according
to the EMC information.
Portable and mobile RF communications equipment can affect Electrical Medical equipment. Do not use RF
equipment in close proximity to the product.
LED lighting is built into the NBX motor and NLX nano motor. It may cause the poor visibility temporarily if
you continue to look at the direct light of the LED. Please do not look at the LED light directly.
Perform periodical maintenance checks.
If the product has not been used for a long period, check for noise, vibration, and overheating before use.
Responsibility for operating and maintaining medical devices belongs to the user.
NLX BF/iMD are for cutting / polishing demanded by the general treatment of the tooth.
Varios 170 generates ultrasonic waves intended for use in dental applications such as scaling, root canal
treatment, periodontal and cavity preparation.
In case of repair, contact your Authorized NSK Dealer.
Classifications of equipment
– Class II equipment
– Type B applied part
or nitrous oxide.
– Continuous operation
NOTICE
3