Optional Accessory - DeWalt DCT410 Manual De Instrucciones

English
Additional camera cable and extensions are available
at additional cost. Please contact D
Tool Co., 701 East Joppa Road, Towson, MD 21286, call
1-800-4-D WALT (1-800-433-9258) or visit our website
e
www.D WALT.com.
e
Dual Lens Camera Operation (Fig. G)
DCT415
Fig. G
DCT4106
11
The DCT415 comes with a dual lens camera (DCT4106) that
allows the user to switch between the front camera lens
and the side camera lens . Press the switch
4
between the two views. The red light on the switch will
illuminate when the front lens is engaged and the green
light will illuminate when the side lens is engaged. Both
cameras have LEDs for increased visibility.
Hook and Magnet
DCT410 (Fig. H)
The hook is beneficial for retrieving cable or wire located in
tight spaces. The magnet is beneficial for retrieving metal
objects in tight spaces.
To attach the hook or magnet, turn the knurled part of the
camera counterclockwise until it stops.
Align the hook or magnet with the gray groove
slide it down until the tabs
29
magnet are securely in the notches
camera lens.
Turn the knurled part clockwise to lock the base of the hook
and magnet.
Fig. H
29
8
WALT Industrial
e
4
3
3
to toggle
11
28 then
at the top of the hook/
located in the
30
28
30

CAUTION: Cut Hazard. Use care when handling hook.
Hook, Magnet and Mirror
DCT411 (Fig. I, J)
Follow the process below to assemble the hook, magnet
or mirror.
1. With the sleeve 25 on the accessory, insert the bottom
of accessory (bent wire) into the hole
camera cable.
Fig. I
26
2. Make sure the accessory is in the groove
sleeve and slide the sleeve onto the camera cable until
the sleeve covers the hole
Fig. J

CAUTION: Cut Hazard. Use care when handling hook.
Belt Hook (Fig. K)

Optional Accessory


WARNING: To reduce the risk of serious personal
injury, DO NOT suspend tool overhead or
suspend objects from the belt hook. ONLY hang
tool's belt hook from a work belt.

WARNING: To reduce the risk of serious personal
injury, ensure the screw holding the belt hook
is secure.
iMPORTAnT: When attaching or removing the belt hook,
use only the screw 23 that is provided.
26 in the
25
22 on the
26 .
25
22