Error Messages - Boso Bosch+Sohn Medicus Smart Manual Del Usuario

Interruption of Measurement
To interrupt a measurement you can press the
button of the release valve until all air has been ex-
pelled from the cuff. (To repeat a measurement,
simply reinflate the cuff.)

Error Messages

If the unit does not emit any rythmic pulse bleeps it
means that the registered pulse is too weak and
there will be no measurement results.
The symbols or
indicate that no blood pressure values or pulse
were available for measurement.
Tighten the cuff around the arm and take a new
measurement.
: Irregular puls or incorrect taking of
blood pressure (i.e. movement during
measurement)
Repeat measurement holding the
arm absolutely still. If the
is displayed again, it can be that an ir-
regular heart beat is present. Consult
your GP.
CUF
in the display
symbol
29