Favero Electronics LIGHTS REPEATER Manual De Uso página 3

materials or construction. The guarantee does not include shipping costs. Batteries are not included in the
warranty. More information on guarantee and post-sale support can be found at www.favero.com.
1.6. Disposal of product
Please dispose of your product in a manner most compatible with the environment and in accordance with federal
or state laws, reusing parts and recycling components and materials when possible.
When this crossed-out waste bin symbol is attached to a product it signifies the product should be disposed of in a
separate container from other waste.
The sorted waste collection of the present device is organized and managed by the manufacturer. Users who wish
to dispose of their present device should contact the manufacturer and follow the procedure indicated for separate
waste collection. Ensuring proper sorted waste collection, in accordance with environmental standards, for the
disposal of further devices helps to protect the environment and the health of persons from any damaging effects.
It also favors the reuse and recycling of materials. Administrative sanctions, in accordance with regulations in
effect, will be applied for any improper or abusive disposal of the product on part of the holder.
1.7. Compliance with CE regulations
The product meets the essential requirements of the Electromagnetic Compatibility and Safety for electronic
devices, in accordance with European directives:
• 2004/108/CE of 15 December 2004,
• 2006/95/CE of 12 December 2006.
2. I
NSTALLATION
Art.894-A and Art.894-B - LIGHTS REPEATER 220V
cable and plug. Insert the telephone type plug in the DATA-LINE socket. Fix the LIGHTS REPEATER on the wall
using the two frontal holes and the two screws you are supplied with.
Art.894-C - LIGHTS REPEATER 12V
the connection of the power supply using the internal terminal block. Replace the back panel making sure the
feeding cable passes through its special slit at the bottom on the left. Rescrew the rear screws. Insert the
telephone type plug in the DATA-LINE socket. Fix the LIGHTS REPEATER on the wall using the two frontal holes
and the two screws you are supplied with.
All versions of the LIGHTS REPEATER are equipped with a telephone type cable 30m long for the connection of
the DATA-LINE to the FULL-ARM-01.
This cable can be easily extended up to 100m by purchasing the special extensions. On the other hand, you can
cut the cable and extend it with only two wires and connecting one wire to the two central wires and the second
wire to the two lateral wires (the cable has four wires).
A luminous red indicator situated near the DATA-LINE socket indicates the situation of the connection with FULL-
ARM-01.
• Indicator always on: the connection is correct.
• Flashing indicator: the connection is imperfect or the FULL-ARM-01 is off.
• Indicator off: lack of power supply to the LIGHTS REPEATER or it has broken-down.
3. A
RTICLE CODE NUMBERS
Art. 894-A LIGHTS REPEATER 230V, for 230V power supply .................................:
Art. 894-B LIGHTS REPEATER 115V, for 115V power supply ..................................:
Art. 894-C LIGHTS REPEATER 12V, for 12V power supply .....................................:
Art. 954 POWER SUPPLY UNIT, 90-264V/12V
F E S
AVERO LECTRONICS RL
. Unscrew the rear screws and remove the plastic back panel. Carry out
AC
,
MEASUREMENTS AND WEIGHTS
DC
3 / 12
and 115V . These versions are supplied with a feeding
AC AC
, 2.5A ........................................: 9.8
ENGLISH
Length Height Depth
[cm] [cm] [cm]
56 19.5
56 19.5
56 19.5
3.1
00894-M01-01-ML - Lights Repeater User Manual
Weight
[kg]
4 1.2
4 1.2
4 1
4.5 0.34