Carat C 2067 Manual De Instrucciones página 29

c) Lock the legs one at a time (Photo 3).
3 3
d) Repeat the operation for the opposite side.
e) Slacken the motor head locking knobs
f) Insert the pipe holding rod in the correct
housing. (Photo 5)
4 4
g) Insert the tile support extension. (Photo 6)
5 5
3. Transport
The C 2067/90 is easy to transport using the special
side handles. (Photo 6)
6 6
Before moving the machine ensure that:
• The motor carriage is locked using the two
cutting adjustment knobs on the runway beam
• The motor carriage is completely lowered and
locked using the locking lever.
• The angle adjustment knobs are tightened well.
• The pipe holding rod is extracted from its
housing.
TO MOVE THE MACHINE:
a) Use a 4 (four)-part tie rod, connected to the
hooks in the transporting handles. (Photo 7)
b) With the help of another person, move the
machine using the transporting handles.
(Photo 6)
7 7
29
GB