Connecting The Charger/Charging The Li-Ion Battery; Function Checks Of Battery-Powered Clipping Machine Favorita Cl /Libra - Aesculap B. Braun Favorita CL Instrucciones De Manejo

Esquiladora a batería
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48
B. Braun Vet Care
Battery-powered clipping machine Favorita
4.1.3 Connecting the charger/Charging the
Li-ion battery
Fire hazard due to battery poles
shorted by fluids or metal compo-
nents!
Do not short the Li-ion battery.
WARNING
Risk of injury and material damage
due to damaged Li-ion batteries!
Prior to charging, check the Li-
WARNING
ion batteries for any damage.
Do not use or charge damaged
Li-ion batteries.
Loss of capacity/performance due
to prolonged storage of discharged
Li-ion batteries!
Store Li-ion batteries only in
CAUTION
fully charged condition and
recharge stored batteries once
every month.
Destruction
charging bay or Li-ion battery when
inserting the wrong type of battery
in the charging bay!
CAUTION
Insert Li-ion batteries only in
the appropriate charging bay.
Insert the Li-ion battery in the
correct position.
Note
Prior to battery loading, switch off the battery-powered
clipping machine Favorita
Note
Li-ion batteries heat up slightly during charging.
6
of
the
product,
/Libra!
CL
/Libra
CL
Note
Unplug the mains power cord at the mains socket when
the charger is not going to be used!
To connect charger 5: Plug in the device plug of
mains power cord 6 in charger 5.
Plug in the mains plug of mains power cord 6 at
the mains power socket.
Insert Li-ion battery 9 in charging bay 7 of
charger 5 and charge the battery.
- or -
Insert battery-powered clipping machine Favorita
Libra 3 in charging bay 11 of charger 5 and charge
the machine.
Charge state indicator 8 or charge state
indicator 10 lights up red.
After charging, the charge state indicator 8/10
shines green and battery-powered clipping
machine Favorita
/Libra 3/Li-ion battery 9 is
CL
ready for operation.
4.2 Function checks of battery-
powered clipping machine
Favorita
/Libra
CL
Carry out a visual inspection.
Check the switch position.
Install the battery, see Chapter Changing the Li-ion
battery.
Mount the blade correctly and lubricate it if
necessary, see Chapter Safe handling: Blade.
Keep a charged Li-ion battery on hand, as reserve.
Clean the battery-powered clipping machine
Favorita
/Libra prior to use, see Chapter Cleaning/
CL
Disinfecting.
/
CL

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

B. braun libraGt200Gt210

Tabla de contenido