Rotary Hammer Safety Warnings; Standard Accessories - HIKOKI DH 24PH Instrucciones De Manejo

Martillo perforador
Ocultar thumbs Ver también para DH 24PH:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48

ROTARY HAMMER SAFETY WARNINGS

1.
Wear ear protectors
Exposure to noise can cause hearing loss.
2.
Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
3.
Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord. Cutting accessory contacting a "live" wire may
make exposed metal parts of the power tool "live"
and could give the operator an electric shock.
4.
Do not touch the bit during or immediately after
operation. The bit becomes very hot during
operation and could cause serious burns.
SPECIFICATIONS
Model
1
Voltage (by areas)*
Power Input*
1
1
No-load speed*
Full-load impact rate
Capacity: concrete
steel
wood
Weight*
2
*1 Be sure to check the nameplate on product as it is subject to change by areas.
*2 Weight: According to EPTA-Procedure 01/2003

STANDARD ACCESSORIES

(1) Plastic case .................................................................. 1
(2) Side handle ................................................................. 1
(3) Depth gauge ............................................................... 1
(4) Drill chuck holder (DH28PMY only) .......................... 1
Standard accessories are subject to change without
notice.
DH24PH
(110 V, 115 V, 120 V, 127 V, 220 V, 230 V, 240 V)
730 W
–1
0 – 1050 min
–1
0 – 3950 min
3.4 – 24 mm
13 mm
32 mm
2.7 kg
5.
Before starting to break, chip or drill into a wall,
floor or ceiling, thoroughly confirm that such items
as electric cables or conduits are not buried inside.
6.
Always hold the body handle and side handle of
the power tool firmly. Otherwise the counterforce
produced may result in inaccurate and even
dangerous operation.
7.
Wear a dust mask
Do not inhale the harmful dusts generated in drilling
or chiseling operation. The dust can endanger the
health of yourself and bystanders.
DH26PC
830 W
0 – 1100 min
0 – 4300 min
3.4 – 26 mm
13 mm
32 mm
2.8 kg
DH28PCY
DH28PMY
850 W
–1
–1
3.4 – 28 mm
13 mm
32 mm
2.9 kg
English
3.2 kg
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dh 26pcDh 28pcyDh 28pmy

Tabla de contenido