General Hardware Data; Signal Description - Fronius IG-TL Serie Manual De Instrucciones

Components Item numbers for the required Fronius components:
required
(continued) Designation
Com card
Interface card
Interface box
Datalogger card
Datalogger box
Datalogger & interface
RS 232 null modem cable (female to female)*
RS 232 extension (female to male)*
* depending on the requirement
Installing compo-
If data communication components (interface card, datalogger card, com card) need to
nents
be installed in the inverters, please see the following operating instructions for the
required information:
Fronius IG Plus operating instructions
-
or
Fronius IG operating instructions
-
or
Fronius IG 300 / 390 / 400 / 500 operating instructions
-
or
Fronius CL 36.0 / 48.0 / 60.0 operating instructions
-
General hardware
The 'Data' serial interface is designed for an RS 232 9-pin sub-D plug.
data
The pins on the 'Data' serial interface are assigned as follows:
Pin
3
2
5
Section: 'Installation and Startup'
- Chapter: 'Inserting Option Cards'
Section: 'Installation instructions'
- Chapter 'LocalNet'
- Section: 'Installing plug-in cards'
Section: 'Installation instructions'
- Chapter 'LocalNet'
- Section: 'Installing plug-in cards'
Section: 'Installation and Startup'
- Chapter 'Inserting option cards'
Signal designation
Transmit (TxD)
Receive (RxD)
Signal earth
Item number
4,240,001
4,240,009
4,240,109
4,240,002
4,240,102
4,240,105
43,0004,1692
43,0004,3888

Signal description

Transmit line
Receive line
GND zero reference point
20