Oursson MF2005 Manual De Instrucciones página 6

Ocultar thumbs Ver también para MF2005:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 8
Before first use, wipe the body of the device with
a soft dry cloth. Other parts and inner surface wash
with warm water and some dishwashing detergent.
Dry. Wipe with clean dry cloth. Pic. E.
Before assembling and disassembling and/or
removing the nozzles, make sure the device is
unplugged.
Order of operation, Рiс. D
1. Select the nozzle and install it into the cooking
container on a special pin. Pic. D-1.
Mode
Action
Foaming + Heating
Press ON/OFF button once
up to 65±10°С
Press ON/OFF button thrice
Foaming
in 2 second
Heating
Press ON/OFF button twice
up to 65±10°С
in 2 second
To avoid overheating, the break between
cycles of operation should be 3 minutes. After
5-th cycle, the device will turn on automatic
protection, On/Off button won't work for 5 min,
it will flash in blue.
NOTE: In order to reduce the waiting time, rinse the container with cold water and wipe it dry.
PREPARATION REcOMMENDATIONS
Max.
Operation
capacity,
ml.
Milk foaming with heating
100
Heating milk without foaming
200
Foaming milk without heating
100
Preparing hot milk from water
150
and milk powder
Preparing hot cocoa
150
Preparing cocktails
150
Preparation of mulled wine, grog
150
and punches
10
2. Fill the container with will up to a required level.
Pic. D-2.
3. Close the lid tightly. Pic. D-3.
4. Place the device onto the stand. Pic. D-4. Plug in the
device. Indication of the
will become red.
5. Press ON/OFF button as many time as required,
selecting the necessary program. Pic. D-5.
6. Turning off. Press ON/OFF button once or wait till
the program is completed, then the device will turn off
by itself. Indication will be red.
Indication
button will become blue
button will flash blue
button will become blue
Cold milk foaming mode can't be turned on
if milk heating is on. To turn on cold milk
foaming turn off the device, let the device
cool and follow the instructions.
Noz-
Mode
Note
zle
Foaming +
4
Heating
Use cold milk(10-15°С)
Use milk with < 3.0% fat.
Heating
5
Foaming
4
Foaming +
For 150 ml of cold water
Heating
add 1 tbsp. of powder milk
5
Foaming +
For 150 ml of cold milk
Heating
add 2 tbsp. of cocoa powder
Ex. recipe: 150 ml of coconut
Foaming
milk whisk with 1-2 tbsp.
4
of raspberry syrup
Ex. recipe: 100 ml of dry red
Foaming +
wine mix and heat with 50 ml
5
Heating
of syrup for punches and mulled
wines
Max.
Operation
capacity,
ml.
Preparing hot wine
200
Preparing hot instant beverages
150
Preparing cold instant beverages
150
cLEANING AND MAINTENANcE, Рiс. E
Wash the cooking container after each use.
• Unplug the device. Remove from the stand.
• Elements of design
1
,
4
,
5
and inner surface of the
container wash with warm water.
• Wipe the body of the device with damp cloth.
Never immerse the device into water, to avoid
electrical shock.
POSSIBLE PROBLEMS AND SOLUTIONS
Problems
cause
Device doesn't turn on
No power supply.
SPEcIFIcATIONS
Model
Power consumption, W
Rated voltage
Weight, kg
Dimensions (HxWxL), mm
Storage and transportation temperature requirements
Operation temperature requirements
Humidity Requirements
Protection class
Products must be stored in dry, ventilated warehouses at a temperature not lower than -25°С.
PRODUcT cERTIFIcATION
For information on product certification, see http://www.oursson.com or ask seller for a copy.
Only a qualified specialist from OURSSON AG service center must do the repair.
Mode
Nozzle
Note
Ex. recipe: warm up 200 ml of
Heating
dry red wine and pour into a
glass with finely chopped fruits
5
Foaming +
Ex. recipe: For 150 ml of cold
Heating
water add 1 pack of instant
beverage powder
Foaming
• Thoroughly dry all the parts.
• Parts of the device can't be washed in a dishwasher.
NOTE: Milk foam can remain at the bottom of the
container. To remove it, fill the container with warm soapy
water for 1-2 hours. Then wipe with soft cloth.
Never use sharp objects for cleaning, as this may damage
the non-stick coating of the device, Pic. A.
Solution
Disconnect the device from the socket
and wait for normalization of the power
supply.
MF2005
Max 450
220-240 V~; 50/60 Hz
0,69
184×115×162
-25°C tо +35°C
+5°C tо +35°C
15 - 75% (without condensation)
I
11

Publicidad

Tabla de contenido
loading

Tabla de contenido