Normal operating ambient temperature should be between 50°F (10°C) to
100°F (38°C). Normal operating water temperature should be between 41°F
(5°C) and 90°F (32°C). Operation of the ice maker for extended periods out-
side of these normal temperature ranges may affect production capacity.
It is strongly recommended that a water filter be used.
•
proper type, can remove taste and odors as well as particles. Some water is very hard,
and softened water may result in white, mushy cubes that stick together. Deionized
water is not recommended.
The ice maker must be installed with all electrical and water connections in accordance
•
with all state and local codes.
The unit should be located on a firm and level surface. It is important for the ice maker
•
to be leveled in order to work properly. If needed, you can adjust the height of the ice
maker by revolving the caster. See the Leveling the Ice Maker section.
A standard electrical supply (115V AC only, 60Hz, 15A), properly grounded in
•
accordance with the National Electrical Code and local codes and ordinances, is
required.
IMPORTANT: Do not kink or pinch the power supply cord between the icemaker and wall
or cabinet.
Electrical requirements
Plug into a grounded 3- prong outlet.
Never remove the ground prong from the plug.
Never use an adapter.
Never use an extension cord.
Failure to follow these instructions can result in fire, electrical
shock or death
Electrical Shock Hazard
9
A filter, if it is of the