Unpacking And Content; Unpacking - Erreka MAGIC Manual Del Instalador

UNPACKING AND CONTENT

1

UNPACKING

1 Open the package and carefully remove the
contents from within.
}
Eliminate the packaging in an environmentally
friendly manner, using recycling containers.

Do not leave the packaging within the reach
of children or handicapped people, as it may
cause injury.
2
CONTENT
Fig. 3 Content and spare parts
2 Check the content of the packages (see figure
below).

Should it be noticed that a piece is missing or
deteriorated, contact the closest technical service.
1 Bottom base plate with bottom
hinge
2 Bottom post plate
3 Countersunk M6 screws (8)
4 Spacer plate for iron post
5 Operator (MAS210F)
6 Countersunk M10 screws (4)
7 Bushing seals (2)
8 Top post plate witn rubber seal
9 Nuts M8 (2)
10 Top fastening plate
11 Top hinge
12 Glands
13 Screws M8 (2)
14 Pressure washer M8 (2)
15 Template to make the orifices
16 Plastic cable cover
17 Capacitor
18 Unlocking keys (only for
MAS210F and MAS250F)
19 Plastic lock cover (2) (only for
MAS210F and MAS250F)
MAGIC integrated electromechanical operator
English
43