Vacuum Packing Of Bottles - Unold 48040 Instrucciones De Uso

DE
6. When the vacuum packing process is concluded, the indicator light goes out
and the appliance stops automatically.
EN
7. Remove the hose from the appliance and from the container.
8. The vacuum packing process is completed and the food in the container is
FR
vacuum packed.
NL
Opening the vacuum packed container
IT To open the container, press the button in the middle of the lid downward. The
vacuum is dissipated and the lid can be taken off of the container.
ES
PL

VACUUM PACKING OF BOTTLES

The vacuum bottle stopper can be used on wine bottles or vegetable oil bottles,
for example. Thus you can easily preserve the aroma and freshness of any liquid.
Caution: Do not use the vacuum packing bottle stoppers for very thin glass bot-
tles, for crystal, plastic or aluminium bottles or for damaged bottles.
Please do not vacuum pack any carbonated liquids. These liquids must be pre-
served under pressure. Vacuum packing causes them to lose the carbonation.
1. Prepare the appliance as described in the section „Preparing the appliance
for operation".
2. Insert the bottle stopper into the opening of the bottle. There must be at
least 2.5 cm of air between the liquid in the bottle and the lower edge of the
vacuum packing bottle stopper.
3. Insert one end of the hose included with your vacuum packing machine
into the connection on the appliance and the other end into the hole in the
vacuum packing bottle stopper.
4. Press the „Vac/Seal" button. The indicator light shows that the appliance
is in operation.
5. Remove the hose from the appliance and from the vacuum packing bottle
stopper.
6. The vacuum packing process is now completed.
7. If you want to interrupt the process, press the button „Vacuum and seal"
again.
Opening the vacuum packed bottles
If you wish to open a vacuum packed bottle, simply pull the stopper out of the
bottle.
34 von 112
Copyright UNOLD AG | www.unold.de
Stand 4.3.2020