Technical Specifications - Velleman SHE15 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

5. Overview
Refer to the illustrations on page 2 of this manual.
A cover
B mist button
C lamp button
D mist exhaust
E reservoir lid
6. Use
Refer to the illustrations on page 2 of this manual.
Make sure the aroma diffuser is disconnected from the mains. Place it on a flat and heat
resistant surface.
Open the cover [A] by simply lifting it while holding the base [H].
Open the reservoir lid [E] and fill the reservoir [G] with water. The water level must be
between the markings as indicated on the reservoir (LOW = minimal, MAX = maximum).
Make sure no water enters the base [H] during filling.
When desired, add some drops of essential oil (not incl.) to the water.
Check whether the air inlet [F] and mist exhaust [D] are not obstructed – clean them when
necessary - and close the reservoir lid [E].
Place the cover [A] back. Do not operate the aroma diffuser without the cover in place. It is
designed in such a way that the air flow is optimal.
Plug the adaptor connector into the power input connector [I] at the back of the aroma
diffuser and plug the adaptor itself into a suitable mains outlet. ONLY use the included
adaptor.
Once plugged in, the aroma diffuser starts working.
Press the mist button [B] once to start mist production. Press a second time to stop the
production of mist.
The SHE15 contains 3 LEDs (red, green and blue). Press the lamp button [C] successively to
switch on the desired colour scheme:
o 1: colour transition (red, green, blue)
o 2: fixed red
o 3: fixed green
o 4: fixed blue
o 5: off
Note: the LEDs only work when the SHE15 produces mist.
When the water level in the reservoir [G] becomes too low, the aroma diffuser will
automatically stop working and a red warning LED behind the mist/lamp buttons [B, C]
switches on. The red colour LED starts flashing. Unplug the device from the mains and add
water (see procedure mentioned above).

7. Technical specifications

LEDs
water reservoir
power rating
power supply
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held responsible
in the event of damage or injury resulted from (incorrect) use of this device. For more
info concerning this product and the latest version of this user manual, please visit our
website www.velleman.eu. The information in this manual is subject to change without
prior notice.
16.07.2010
SHE15
F
G
H
I
3 LEDs, red - green – blue
180ml
12W
24Vdc-500mA through PSU (incl.)
100 x 113 x 198mm
245g
4
air inlet
reservoir
base
power input connector
Rev. 01
©Velleman nv

Publicidad

Tabla de contenido
loading

Tabla de contenido