Elinchrom Rotalux Manual De Instrucciones página 5

1. Assembling the Rotalux Softbox:
A) Place the speedring with the locking knob at the top on a firm horizontal
surface.
B) Pull out each of the rod sockets and move them into the 90° vertical position
and release.
C) Place the speedring in the centre of the reflection fabrics.
D) Ensure that the slots of the rod sockets coincide with the seams of the
reflection fabrics.
E) Insert the bare ends of the rods into the sockets of the Speedring.
F) One at a time bend rods opposite outwards, applying gradual pressure on
the capped end to give slight curvature. Manipulate the respective capped
ends to fit into the cloth pockets at the coinciding corners of the reflection
fabrics. If necessary, readjust as shown in the picture 1.D.
G) The rods fixed at both ends, have now a convex curve. Hold the rod and
twist each to make the curve concave.
1.A
1.C
1.E
1.B
1.D
1.FG
1.C
1.D
5