Using The Machine; Electrical Connection - BOMANN DB 616 CB Instrucciones De Servicio

Handle
The handle (12) rotates. You can fold it out or place it over the iron as you wish.
Steam Brush
With the brush attachment or steam brush you can freshen up creased laundry.
• To do so, push the brush attachment on to the soleplate and tighten the lock (5).
• If the steam brush is used the tank must be full and a high temperature selected, e.g.
cotton or linen.
• Garments that are hanging up can be treated with the steam jet button.
NOTE:
If you use this function, the water tank should always be replenished in good time.
NOTE: This device should only be used for ironing garments and textiles!
Remove any protective fi lms and adhesive labels from the stainless steel soleplate before
using the appliance. Completely unwind the line cord.
Ironing without steam
1. Empty the water tank if necessary.
2. Place the iron on its stand (9).
3. Sort out the garments according to their ironing temperatures. Start with the lower
temperatures. It is set with the thermostat (1):
„ "
„ "
„ "
max

4. Electrical connection

NOTE:
Always set the temperature control (1) to „min" before connecting the appliance to a
power point, or before disconnecting it.
• Make sure that the iron voltage (see name plate) and the line voltage match.
• Only connect the machine to a properly installed safety socket, 230 V/50 Hz.
05-DB 616 CB_neu 47
Instructions for Use

Using the Machine

Synthetics, silk
Wool
Cotton, linen
low temperature
medium temperature
high temperature
maximum temperature
12.04.2007, 10:47:38 Uhr
GB
47