Ce Declaration Of Conformity - Triton TRPUL Instrucciones De Uso Y De Seguridad

Note: Wear eye protection when cleaning out the pulley area.
3. With the four continuous 'V' profiles on the inside, place the new belt
over the bottom pulley. Half fit the other end of the belt on the top
pulley then roll the belt in place while turning the pulley
4. Check that the belt runs evenly by manually turning the belt
5. Replace the cover and the five fixing screws
6. Connect the tool to the power supply and run the planer for a minute or
two to make sure that the motor and belt are operating correctly
Cleaning
WARNING: ALWAYS wear protective equipment including
eye protection and gloves when cleaning this tool.
• Keep your tool clean at all times. Dirt and dust will cause internal
parts to wear quickly, and shorten the device's service life
• Clean the body of your machine with a soft brush, or dry cloth
• Never use caustic agents to clean plastic parts. If dry cleaning is not
sufficient, a mild detergent on a damp cloth is recommended
Guarantee
To register your guarantee visit our web site at
tritontools.com* and enter your details.
Your details will be included on our mailing list (unless indicated otherwise) for
information on future releases. Details provided will not be made available to any third
party.
Purchase Record
Date of Purchase: ___ / ___ / ____
Model: TRPUL Retain your receipt as proof of purchase

CE Declaration of Conformity

The undersigned: Mr Darrell Morris
as authorised by: Triton
Declares that
This declaration has been issued under the sole responsibility of the manufacturer.
The object of the declaration is in conformity with the relevant Union harmonisation
Legislation.
Identification code: TRPUL
Description: 750W Unlimited Rebate Planer
Conforms to the following directives and standards:
• Machinery Directive 2006/42/EC
• Low Voltage Directive 2014/35/EU
• EMC Directive 2014/30/EU
• RoHS Directive 2011/65/EU
• EN 60745-1+A11:2010
• EN 60745-2-4+A11:2011
• EN 60745-2-14+A2:2010
• EN 61000-3-2:2014
• EN 61000-3-3:2013
• EN 55014-1:2006+A2:2011
• EN 55014-2+A2:2008
• Water must never come into contact with the tool
• Ensure the tool is thoroughly dry before using it
• If available, use clean, dry, compressed air to blow through
the ventilation holes (where applicable)
Lubrication
• Lubricate all moving parts with a suitable lubricant spray, at regular intervals
Storage
• Store this tool carefully in a secure, dry place out of the reach of children
• Store out of direct sunlight
Disposal
Always adhere to national regulations when disposing of power tools
that are no longer functional and are not viable for repair.
• Do not dispose of power tools, or other waster electrical and
electronic equipment (WEEE), with household waste
• Contact your local waste disposal authority for information
on the correct way to dispose of power tools
Triton Precision Power Tools guarantees to the purchaser of this product that if any part
proves to be defective due to faulty materials or workmanship within 3 YEARS from the
date of original purchase,
Triton will repair, or at its discretion replace, the faulty part free of charge.
This guarantee does not apply to commercial use nor does it extend to normal wear and
tear or damage as a result of accident, abuse or misuse.
* Register online within 30 days.
Terms & conditions apply.
t pr
ar
This does not affect your statutory rights
Notified body: TÜV Product Service Ltd.
The technical documentation is kept by: Triton
Date: 02/06/2016
Signed:
Mr Darrell Morris
Managing Director
Name and address of the manufacturer:
Powerbox International Limited, Company No. 06897059. Registered address: Powerbox,
Boundary Way, Lufton Trading Estate, Yeovil, Somerset, BA22 8HZ, United Kingdom.
oves to be defecti
GB
9