SICE S 1000 Manual De Instrucciones página 129

CAUTION!
The top bead breaker automatically hooks during the descent phase.
1 - Operate the
lever and move the disc, taking it to about 5 mm above the rim
edge (Fig. 21a).
2 - Press the
button to activate pen-
etration of the lower bead breaker disc (Fig. 21b).
3 - Lubricate the bead to make bead breaking
easier (Fig. 21c).
4 - Press the pedal to turn the turntable.
21a
5 - Operate the control, tapping on it, to
raise the bead breaker disc and fully remove the
bead from its seat on the rim.
6- Turn at least one rotation to finish lower bead
breaking.
7 - Move the lever downward to automati-
UK
cally stop penetration and to withdraw the disc from
the work area.
21b
8 - Use the
control to move the upper bead
breaker disc to the work position.
9 - Operate the
lever and move the disc, tak-
ing it to about 5 mm below the rim edge (Fig. 21d).
10 - Press the upper bead breaker disc penetration
button (Fig. 21e).
21c
User manual S 1000
129