Unclamping And Unloading The Wheel - SICE S 1000 Manual De Instrucciones

If the tyre is over-inflated, air may be released by
pressing the brass manual deflation button located
below the air pressure gauge (2, Fig. 26d).
Disconnect the inflation hose from the valve stem.
26f
5.7. UNCLAMPING AND UNLOADING
THE WHEEL
Press the pedal to unclamp the wheel.
Turn the handle clockwise to 90° and remove it
(Fig. 27a).
Return the handle to its seat.
Operate the pedal and move the lift to
the height of the turntable spindle. 27a
Place the wheel on the lift (Fig. 27b).
Operate the pedal until the lift is at
UK
floor level.
Remove the wheel from the lift and move it away
from the work area.
27b
User manual S 1000
139